Application example – American Time Wireless Indoor Strobe/Siren User Manual
Page 7
© American Time
Wireless Indoor Strobe/Siren
Application Example
To manually activate the Wireless Indoor Strobe/Siren using the Remote Connect web interface:
1. Enter your SiteSync IQ system controller IP address into a web browser (such as Internet Explorer)
2. Log in with your User name and Password
3. Select Circuit tab
4. Select the Manual Activation tab
5. Change the Signal Duration for the appropriate circuit to your desired duration (1-9 seconds, ON)
6. Enable the circuit # associated with your Wireless Indoor Strobe by putting a check mark in the appropriate box
7. Click on the Wireless button
The Wireless Indoor Strobe will sound and flash for the duration set in the Remote Connect application.