Dimplex DF3033ST - Manual (Page 12)

12 www.dimplex.com
Operation
independent frequencies to
prevent interference with other
units.
Battery Installation
Depress tab on the battery 1.
cover on the back of the
remote control and remove
battery cover (Figure 5).
Install two (2) aaa batteries
2.
into the remote control
(included).
Ensure child lock is in the
3.
“unlocked” position (Figure 5).
Replace the battery cover.
4.
!
NOTE: When the “baT”
symbol is present on
the remote control it is
recommended to replace the
batteries promptly, to maintain
full functionality of the remote/
fireplace. The remote control
has a battery backup time of
only several hours.
battery must be recycled
or disposed of properly.
Check with your Local
authority or Retailer for recycling
advice in your area.
Figure 5
batteries
Child Lock
Initializing/Reprogramming
the Remote Control
Plug cord into 120 volt wall 1.
outlet.
Ensure the on/off Switch
2.
located in the switch box on
the fireplace in the upper right
hand corner is in the on
position (Figure 4a).
Set the 3 Position Manual
3.
Control (Figure 4b) to
the Remote position (left
position).
Press and hold the
4.
Initialization button on the unit
(Figure 4C).
While holding the Initialization
5.
button, press the Flame/
heat on/off button on the
remote control.
Release the Initialization
6.
button on the unit.