Denon DJ RCD-CX1 User Manual
Page 24
0
ENGLISH
Get
ting Star
ted
Connections
Set
up
Set
ting the
Timer
Other F
unctions
Tr
oubleshooting
Specifi
cations
[2/u, 8/i,
4/o, 6/p]
[PROGRAM/
DIRECT]
[5/ENTER]
[TUNER]
[CLEAR]
[MODE]
[NUMBER]
[MENU/SET]
[CH–/8, CH+/9]
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
Pla
ybac
k
About the FM Broadcast Reception Status Display
When the reception band mode is set to “FM AUTO”, the “ST”
indicator lights when a stereo broadcast is tuned in.
If the signal is weak and stable stereo reception is not possible, select
“FM MONO” to receive in monaural.
• Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
• Once auto presetting starts, it cannot be stopped before it is
completed. (It takes about 60 seconds for auto presetting to be
completed.)
Automatically Presetting FM Stations
(Auto Preset)
Up to 40 stations can be preset.
Auto preset is not possible with AM broadcast stations.
1
Press
[TUNER]
to select “FM AUTO” or “FM
MONO”.
2
Press and hold in
[MENU/SET]
.
“A.PRESET” fl ashes.
3
Press
[MENU/SET]
again.
Broadcast stations are preset automatically.
Use
[NUMBER]
(
0
~
9, +10
) or
[CH –/8, CH +/9]
to
select the preset number.
Listening to Preset Stations
Presetting FM/AM Stations Manually
Up to 40 stations (total for FM and AM) can be preset.
1
Tune in the station.
2
Press
[PROGRAM/DIRECT]
.
The minimum number display “P– –” for the unregistered preset
fl ashes.
3
Select the number to be preset using
[NUMBER]
(
0
~
9, +10
) or
[CH –/8, CH +/9]
and press
[PROGRAM/DIRECT]
.
The reception frequency and reception mode are preset.
Naming the Currently Tuned in Broadcast
Station
Names of up to 8 characters can be input.
1
Press
[MENU/SET]
three times.
2
Press
[2/u]
or
[8/i]
.
The name input mode is set.
3
Use
[2/u, 8/i]
to select the character, then press
[6/p]
to set.
b
Characters that can be input.
A to Z, 0 to 9, ^ ’ ( ) * + , - . / = (space)
b
Press
[4/o, 6/p]
to move the cursor.
b
Press
[CLEAR]
to delete characters.
4
When the name has been entered, press
[5/ENTER]
to
confi rm the entry.
n
Changing the Broadcast Station Name
q
Call out the preset name to be changed, then press
[MENU/SET]
three times.
w
Use
[4/o, 6/p]
to select the character to be changed, then press
[CLEAR]
.
e
Perform step 3 and 4 at “Naming the Currently Tuned in Broadcast
Station”.
If a preset number has not been registered for the broadcast station
you have entered, you are prompted to enter it now. Set the number
to be preset using
[CH–/8, CH+/9]
.
1.RCD-CX1_ENG.indd 20
2008/05/30 11:20:33