AGI Security CA-HTDR811 - Manual (Page 5)

When the camera menu is entered, you’ll see the keys on the bottom right corner to
move between and change those configurations.
 Move between selections or change settings.
 Enter the currently-selected item.
X Quit the camera parameters mode.
MENU DESCRIPTION
DAY / NIGHT MODE EXT / COLOR / B&W / AUTO Set the day & night mode among EXT, COLOR, B &
W, and AUTO.
D TO N 1 ~ 63 Set the sensitivity for the day & night mode from day
to night.
N TO D 1 ~ 63 Set the sensitivity for the day & night mode from
night to day.
DELAY TIME 1 ~ 60 Set the delay time after which the day and night
switch is made.
AWB MODE AUTO / USER / (PUSH) / 8000K
/ 6000K / 4200K / 3200K / HOLD Set the white balance mode among AUTO, USER,
(PUSH), 8000K, 6000K, 4200K, 3200K, and HOLD.
R-G GAIN 1 ~ 255 Adjust the ratio between red and green.
B-G GAIN 1 ~ 255 Adjust the ratio between blue and green.
AE MODE ESC / HOLD Set the exposure mode between ESC and HOLD.
BRIGHT 0 ~ 255 Set the level of brightness to adjust the brightness of
the image.
SHUTTER AUTO / 1/25 / 1/30 / 1/50 / 1/60 /
1/100 / 1/ 120 / 1/250 / 1/500 /
1/1000 / 1/3000 / 1/10000 Set the shutter speed for exposure.
FLICKER OFF / 50HZ / 60HZ Enable this function to enhance the flicker situation.
BLC 0 ~ 16 Set the level of Back Light Compensation to adjust
the image to compensate for an area that is
overpowered by brightness because of excessive
light.
AGC 1 ~ 5 Set the level of Auto Gain Control to automatically
adjust the image when the light level changes.
LSC ON / OFF Enable or disable Lens Shading Correction to
correct the phenomenon of vignetting when the focal
length is short.
SPECIAL PRIVACY
ZONE
AREA SEL. / MASK PAT. / SX /
EX / SY / EY Set to cover certain areas on the camera image.
MOTION MOTION / SENSITI. / ALARM /
HOLD TIME Set certain areas for motion detection.
HLC HLC / MASK VALUE /
THRESHOLD Set to suppress strong backlight for clearer images.
EFFECT COLOR GAIN 0 ~ 255 Set the level of gain.
COLOR HUE 0 ~ 71 Set the level of hue.
SHARPNESS 0 ~ 255 Set the level of sharpness to enhance the clarity of
image detail by adjusting the aperture and
sharpening the edges.
CONTRAST 0 ~ 255 Set the level of contrast.
BRIGHT OFF. -128 ~ 127 Set the level to compensate the brightness of the
image.
MIRROR OFF / ON Enable to rotate the images horizontally based on
your installation situation when necessary.
FLIP OFF / ON Enable to rotate the image 180° when necessary.