Zytronic ZXY110 User Manual
Page 16
Integration Manual - Issue 1
Zytronic Projected Capacitive ZXY100/110
®
Touch Controller & Sensor
16
DOUBLE SIDED GASKET PADS MOUNTING OPTION
If gasket pads are used to mount the controller PCB, a separate ground connection from one of the
controller PCB screw holes must be made to the LCD chassis using a low impedance ground cable,
as shown in Figure 14.
LOW IMPEDANCE GROUNDING CABLE
MINIMUM 5MM GAP
FIGURE 13
FIGURE 14
This manual is related to the following products: