ZVOX Audio SoundBase® V Series 220 - Manual

Surround Settings
There are three SURROUND levels:
• Surround One (“SN 1”) has low virtual surround effect and strong vocals. Use this setting if
vocal clarity is very important to you.
• Surround Two (“SN 2”) has moderate virtual surround effect and moderate vocals. Most
people prefer this setting for most program material.
• Surround Three (“SN 3”) has strong virtual surround effect and moderate vocals. Many
people prefer this setting when watching movies.
M I D D L E PA N E L [ A S I D E ]
Output Leveling
Press this button to prevent large changes in volume. When engaged,
it boosts quiet dialog and lowers the output of loud commercial breaks.
It also reduces volume swings between cable or satellite channels.
This feature can be used along with any of the three Surround settings.
Dialog Enhancement
Press this button to engage a feature that increases the clarity of most
voices.
Pressing Dialog Enhancement overrides the current Surround and
Output Leveling setting.
A second press of Dialog Enhancement returns a V-Series system to
the last-used Surround and Output Leveling settings.
3B. Front Panel Controls and Input.
1 MUTE/Power button. Also while the system is on, if you press and hold the MUTE
button for longer than four seconds, the system will enter STANDBY. If the system is in
STANDBY, pressing this button turns it on.
2 VOLUME -/+. The volume range indication is 01 to 30.
3 INPUT. Press this button so select between the two digital inputs and the three
analog inputs.
4 AUDIO CONNECTING JACK. This 3.5 mm stereo minijack can be used to connect an
iPod
® , MP3 player, portable CD player or any other audio device. Use a “miniplug to
miniplug” cable to connect your device to the front panel input, then switch to Input 3
using the remote control or the Input button on the front panel.
4. Pairing your preferred remote with the V-Series system
Please refer to our Guide, “Your TV Remote Can Control Your ZVOX System
ZVOX V-Series
Setup & Operation
Don’t Worry It’s Pretty Easy.
Great Sound Made Simple
Home Theater Made Simple!
What’s In The Box
ZVOX Sound System • Remote control • Three Setup Sheets
AC to DC power supply • Analog signal cable (L/R phono plugs at both ends)
1
Place The System
On Furniture.
STEP
2
STEP
Connect One
Signal Cable.
3
Connect the
Power supply.
STEP
4
STEP Learn To Use
The Remote.
®
MUTE VOLUME INPUT MUTE VOLUME INPUT MUTE VOLUME INPUT
MUTE VOLUME INPUT
MUTE VOLUME INPUT