Zilog Z16FMC2 - Manual (Page 17)

UM023402-0811 ZDS II
Z16FMC™ Series Motor Control Development Kit
User Manual
11
•
Heat sink temperature sensor
•
Spade lug connectors for power input from adjustable 24 VDC power source (for con-
nection to 3-phase motor)
•
5 A fuse, F1
•
Two 60-pin headers for connection to the MC MDS Module (JP1 and JP2; JP1 used
for physical mounting only)
Power MOSFETs and Gate Drivers
Each of the phase outputs on spade lugs P1, P2, and P3 are driven by a pair of power
MOSFETs, one for the high side and one for the low side. A gate driver circuit is associ-
ated with each pair of power MOSFETs.
Fused External Power Interface
An interface to an adjustable 0 VDC to 24 VDC workbench power supply is provided
through spade lug connectors P4 (+) and P5 (–). The input power is fused through 5 A
3 AG fuse F1.
Physical Dimensions
The footprint of the 3-Phase Motor Control Application Board PCB is 12.44 cm x
12.44 cm. With the MC MDS module mounted on it, the overall development kit height is
4.31 cm.
ZDS II
The Zilog Developer Studio II (ZDS II) Integrated Development Environment (IDE) is a
complete stand-alone system that provides a state-of-the-art development environment.
Based on the Windows
®
XP/Vista-32/Win 2000-SP4 user interfaces, ZDS II integrates a
language-sensitive editor, project manager, C-Compiler, assembler, linker, librarian, and
source-level symbolic debugger that supports the Z16FMC Series of devices.
Troubleshooting and Developer Guidelines
Before contacting Zilog Customer Support to submit a problem report, follow the steps
below. If there is a hardware failure, contact a local Zilog representative for assistance.