Dolby Laboratories DVP650 - Manual (Page 13)

DVD CD MP3 PLAYER
DVP650
1. Connect the DVD player to your TV and amplifier.
2. Turn on the TV.
3.
4. Turn down the volume on your amplifier, and then power it on.
5.
Set the TV to the AV input connected to the DVD player.
Set the amplifier to the AV input connected to the DVD player.
Basic Operation
Basic Playback
STEP 3 - Press the PLAY
button on the front panel or
remote control. The player
will automatically read and
identify the disc, and begin
playback.
Preparation before playing:
-12-
STEP 1 - Press POWER
to start the player. The
DVD logo appears on
the TV screen.
STEP 2 - Press OPEN/CLOSE either
on the front panel or remote control.
When the tray is open, place the disc
on the tray with the label side up.
Press OPEN/CLOSE again to close
the disc tray.