Nupoe-m16el management, Access to nupoe, Access with ip address – Xtramus NuPOE-M16EL V1.1 User Manual

Page 18: Access with network, 5 nupoe-m16el management

Website: www.Xtramus.co

XTRAMUS

5 NuPOE-M16EL Management

You can configure the settings and check the running status of NuPOE-M16EL on the web browser.

5.1 Access to NuPOE-

16EL’s Management Webpage

Before accessing to NuPOE-M16EL

’s management webpage, please properly connect the PC with

NuPOE-M16El and rightly configure the IP address. Please refer to

for details. The default IP address is 192.168.1.8.

5.1.1

Access with IP address

To access NuPOE-M16EL

’s management webpage, please open your web browser, and type in

NuPOE-M16EL

’s default IP address (192.168.1.8) in the web browser’s URL field.

Note:

If you’ve changed NuPOE-M16EL’s IP address, please use the IP address you’ve changed to.

5.1.2

Access with Network

You can access the NuPOE-M16EL

’s management webpage through the Network function provided

by windows (windows XP, windows7 or versions above). Click Network of the operation system, you can

see the NuPOE-M16EL is listed. Then click the icon of the NuPOE-M16EL device to enter the

management webpage.

If you can’t find the NuPOE-M16EL, you can reset the UPnP settings and then check whether the

NuPOE-M16EL device is listed again. This method

is very convenient if you forget the IP address you’ve

set or under the condition of not connecting to the console.