Lb utility buttons – Xtramus LB-300 V1.0 User Manual
Page 18
18
4.2.2. LB Utility Buttons
Descriptions – System Information
Refresh
Click this button to refresh the information displayed on System Information.
Click this button to upgrade LB-300’s firmware. Please follow the instructions down
below to upgrade LB-300’s firmware. *Note: LB-300 must be connected to your
PC via Mini-USB cable at all time during the upgrading.
1. Click the Firmware Upgrade
button.
2. A Load File window will pop up.
Please select LB-300 firmware file
path, and click Open. LB-300
firmware contains two files in the
format of “*.bin” and “*.hex”.
Please select the file with the
format of “*.bin”.
3. A message window will pop up.
Click YES to start upgrading
firmware, or click NO to cancel.
Firmware Upgrade
4. Upgrade complete! LB-300 will
reboot after upgrading firmware.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®