Xtramus LES-5160 V1.2 - Manual (Page 21)

21
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
2.2.3. Power Module
Steps for installing a XCP-A1W-300
Installing a XCP-A1W-300 into LES-5160 is
quite simple. First of all, attach the Power
Module into the respective slot of LES-5160
and push the handle of the Power Module into
the slot. After the Bracket of the Power Module
reaches the LES-5160, lock the captive screw
into LES-5160 as shown by arrows 4 and 5.
Note: The XCP-A1W-300
doesn’t support
hot swap. Please don’t remove Power
Module during System operation.