XTA GQ600 - Manual (Page 12)

GQ600 Page
10
Specifications
Inputs Two, electronically balanced.
Impedance > 10k ohms.
CMRR > 65dB 50Hz - 10kHz.
Outputs
Two, electronically balanced.
Source Imp. < 60 ohms.
Min. Load 600 ohms.
Max. Level +23dBm into 600 ohm load.
Gain
± 10dB via rotary control.
Frequency Response
± 0.5dB 20Hz - 20kHz with controls "flat".
Equivalent Input Noise
< -98dBm (20-20kHz unweighted) with controls '"flat".
Distortion @ +18dBm
< 0.01% @ 1kHz.
Peak Indicator
Threshold: +20dBu.
H.F. Trim
Filter Type 2nd order, optimum phase, shelving.
Frequency 2kHz - 20kHz.
Gain ± 8dB max. @ 20kHz.
H.F. Trim In/Out Front panel switch with LED indicator.
High-pass Filter
Filter Type 12dB/octave H.P.
Frequency 10Hz - 150Hz.
Low-pass Filter
Filter Type 18dB/octave -3dB @ 27kHz.
LPF In/Out Link selectable on PCB.
Equaliser Section
Filters 2 x 30, 1/3 octave, 25Hz- 20kHz.
Filter Type High performance simulated LCR network.
Freq. Tolerance ± 3%.
Range ± 10dB.
Connectors
Inputs 3 pin female XLR.
Outputs 3 pin male XLR.
Power 3 pin IEC.
Power
80VAC – 260VAC @ 50/60Hz.
Consumption < 20W
Weight
5kg. Nett (6.7kg. shipping )
Size 5.25"(3U) x 19" x 9.3" (133 x 482 x 237mm)
excluding connectors.
Options
Input transformers available.
Output transformers available.
Perspex security cover.