Dukane Data Video 8107HWI - Manual (Page 38)

36
1.9 Profile data (continued)
• If there are already 10 profile data, the check box cannot be checked.
Please erase one of the existing profile data.
• The profile name for the stored data is assigned by the “LiveViewer”
automatically. The name will be shown at the right side of the check box.
NOTE
Also, you can register a profile data to My
Connection, when the network connection
is established. When it is established, the
“Connection to Projector successful” screen is
displayed. (
30)
If you wish to use the current connection
setting for My Connection, check in the box for
the [Register this setting to My Connection].
And then, if it is okay to overwrite the present
data for My Connection, click the [OK].
A new profile data will be created and it is
registered as My Connection profile data.
1. Connection to the network