WaveWare AlphaNet Wireless User Manual
Page 8
Other Setup Information, continued:
Important
Setup Information for the “Pager Header” field:
•
The number 2, shown here in red color, (\001A
2
[CAP CODE]\002)
represents the Pager Baud Rate of the Paging Data Receiver (PDR) and
is set at 2400 BR.
•
WaveWare sets that baud rate at 512 BR for better signal reception, but
you may use any of the 3 Baud Rate settings shown in the Chart below.
See Fig. 9
PDR Baud Rate Pager Header Field Info
Pager Trailer Field Info
512
\001A
5
[CAP CODE]\002
\003\004
1200
\001A
1
[CAP CODE]\002
\003\004
2400
\001A
2
[CAP CODE]\002
\003\004
Fig. 9
•
Be sure to properly enter the new “Pager Header” Field that corresponds
to the PDR Baud Rate that you are using. If this information is not correct,
the PDR will not receive the signal.
•
The
“Pager Trailer” field is normally not changed.
•
Click OK when finished.
This concludes the General Setup and Other Information Setup.
Next: Creating and Saving Messages.
WaveWare Technologies, Inc
.
1-800-373-1466
Fax: 972-479-1735
Technical Support at:
x 109
or E-mail to:
www.wirelessmessaging.com