TVLogic XVM-245W-N - Manual (Page 12)

[1] PICTURE PART
Below is the description of each function of the menu.
BRIGHT
- This item controls the degree of brightness between MIN(-100) and MAX(100).
CONTRAST
- This item controls the contrast ratio between MAX(100) and MIN(-100).
CHROMA
- This item controls saturation between MAX(50) and MIN(-50).
PHASE
- This item controls PHASE value (Tone) between MAX(50) and MIN(-50). However, it is only
available on COMPOSITE and S-VIDEO among ANALOG modes.
APERTURE
- This item controls the picture sharpness. Sharpness select between MIN(-1) and MAX(5).
NTSC SETUP
- This item sets the IRE value under NTSC mode between 0 IRE and 7.5 IRE.
- Only available in COMPOSITE 1/2/3 and S-VIDEO modes containing a NTSC signal.
VGA H POSITION
- This item controls VGA H position. It is only available on DVI analog mode.
VGA V POSITION
- This item controls VGA V position. It is only available on DVI analog mode.
Multi F
orma
t L
CD M
onit
or
12
Menu Contents