Delta 50-770 - Manual (Page 7)

7
4. Align the two holes in the intake support angle brace
(A) Fig. 10 with the two holes in the intake funnel (B).
5. Fasten the intake support angle brace to the intake
funnel by inserting the two 5/16-18x5/8" button head
carriage bolts (C) thru the intake funnel (B) and the intake
support angle brace (A) as shown in Fig. 11.
6. Place a 5/16" lockwasher (A) Fig. 12,onto the bolt
(B), and thread a 5/16" hex nut (C) onto the bolt (B) and
tighten securely.
7. Attach the upper support bracket (B) Fig. 13 to the
intake support angle brace (C) with the adjustable
locking lever (D). NOTE: PLACE A 5/16”
LOCKWASHER (E) FIG. 13, ONTO LOCKING LEVER
SCREW BEFORE ATTACHING TO THE INTAKE
SUPPORT ANGLE BRACE.
Fig. 10
A
B
Fig. 11
B
A
C
Fig. 12
A
B
C
Fig. 13
B
C
D
E