Delta 50-770 - Manual (Page 4)

4
UNPACKING AND CLEANING
Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from all
unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline
or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste
wax.
Fig. 2
1. Dust collector
2. Hose
3. Dust bag
4. Outtake flange
5. Outtake flange gasket
6. Intake funnel
7. Intake support angle brace
8. Upper support bracket
9. Lower tube support
10. Wheel casters (4)
11. Lower tube support clamps (2)
12. Adjustable locking lever
13. Hose clamps (2)
14. 5/16-18x5/8" Button head carriage bolt (2)
15. 5/16" lockwasher (3)
16. 5/16" Hex nut (6)
17. 5/16-18x5/8" Hex head screw (4)
18. Intake cap
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18