Transystem 760 - Manual (Page 7)

G-Log 760 GPS Recorder
V1.1 7
2-2. Buttons
Name Description
Power Press and hold 3 seconds to turn On and Off your device.
Press to check the battery status when device is power on.
POI Push button to record Point of Interest (POI),
Memory status LED will blink 3 times to confirm button pressed
Mode change Press POI button for 5 seconds to switch between normal and smart mode.
Press POI button for 10 seconds to switch between normal and car mode.
* Vibrating feedback is provided when POI button is pressed.*
Reset Button Push to have device back to normal mode.
Press for 5 seconds to have factory default setting and logged data erased.
Please do not turn off the device when memory red color LED is flashing.
2-3. LED Display
The G-Log 760 GPS Recorder has following LED displays for status update.
Symbol
Function /
Color
Status Description
Battery Status /
Red Blinking Low battery level
On During power charging via USB port
Battery Status /
Green
On / Off
Power gauge when both POI and Power
buttons are pressed at the same time
Battery Status /
Green & Red
All LED On Fully charged
GPS Status /
Orange
On Searching for satellite
Blinking GPS fix & start log
Car mode status /
Blue
On
In car mode, device will go into sleep
mode when no power supply from USB
and device will wake up and start logging
when there is power supply from USB.