beautypg.com

Power failure recovery system, Turning heater off – Toyotomi FF-V30T User Manual

Page 15

background image

14

OUT OF BACKUP MEMORY

Start the combustion from the
beginning.
Set temperature will change to
13˚C (56˚F) for safety.
Set temperature and room
temperature will blank that at
least more than 30 min. power
failure has occurred.
To stop the blinking the set
temperature and room
temperature, press any button
once.
Keep the same condition before
the power failure.
The setting will be erased.
(See Page 13.)
The setting will be erased.
(See Page 10.)

LESS THAN 3

SECONDS

Restart the combustion
with the same condition
before the power failure.

Keep the same condition
before the power failure.
Keep the same condition
before the power failure.
Keep the same condition
before the power failure.

IN BACKUP MEMORY

Start the combustion from the
beginning.

Keep the same condition before
the power failure.
Keep the same condition before
the power failure.
The setting will be erased.
(See Page 10.)

IN BACKUP MEMORY

OUT OF BACKUP MEMORY

Child lock operation (See Page 10.)
Clock and Day setting (See Page 7.)
Auto operation (See Page 13.)
Child lock operation (See Page 10.)

TIME LENGTH OF

POWER FAILURE

OPERATION

POWER SAVER

OPERATION

AUTO OPERATION

CHILD LOCK

OPERATION

POWER FAILURE RECOVERY SYSTEM

If at any time a power failure occurs during operation, heater will turn off. When the power returns, the unit will

automatically restart with the following conditions. Please reset each setting when the settings are erased as

indicated below.

WHEN HEATER IS IN OPERATION

If at any time a power failure occurs when heater is not in operation, the unit will basically start the operation while

keeping the same condition before the power failure. However, when the power failure continued more than 3

seconds, the following settings will be erased. Please reset each setting.

WHEN HEATER IS NOT IN OPERATION

TURNING HEATER OFF

Press ON/OFF switch to “OFF” position. ON lamp will flash and will go out. Circulation fan

and blower motor continue to run for approx. three (3) minutes to cool down the heater.

Make sure ON lamp goes out when the fan stops.

MORE THAN 3 SECONDS

FF_V30T_Type B_US.qxd 14.6.2 11:51 ページ 14

This manual is related to the following products: