Top Global MB5000K User Manual
Page 67
Top Global USA. ----MB5000 User Guide
4. After finishing this preparation, power on the MB5000.
5. Press
the
RESET
button.
6. Press and hold the RELOAD button for about 10 seconds immediately after you
press and release the RESET button until the POWER LED turns amber and the
WWAN LED turns off. Result: The MB5000 deletes the current MB5000 software
and Configuration files. Then MB5000 will download the software you have
prepared in step 3. Observe what
the TFTP displays and you should see
downloading activity begins after a few seconds.
7. After finish this procedure, MB5000 will reboot automatically and you can see the
POWER LED turns amber and blinks.
8. MB5000 will be configured to the factory default value. Please refer Table 6-1 for
the factory default value.
Firmware Upgrade Procedure through Web
Use this procedure to upgrade the newest version firmware for MB5000 through Web
interface on user client. This procedure may be necessary when a new version of
firmware is released(Figure 4-1).
Figure 4-1 Firmware upgrade
MB5000's firmware is upgraded through Firmware tab. Follow these instructions:
1. Download the firmware from Top Global’s website at
to your
host PC.
2. Enter the location of the firmware file or click the Browse button to find the file.
3. Then, click the Upgrade Firmware button to upgrade the firmware.
- 67 -