D-Link DIR-635 User Manual

Page 15

Section 3 - Configuration

If you selected Dynamic, you may need to enter the MAC address of the

computer that was last connected directly to your modem. If you are currently

using that computer, click

Clone Your PC’s MAC Address and then click

Next to continue.

The Host Name is optional but may be required by some ISPs. The default

host name is the device name of the Router and may be changed.

If you selected PPPoE, enter your PPPoE username and password. Click

Next to continue.

Select

Static if your ISP assigned you the IP address, subnet mask,

gateway, and DNS server addresses.

Note: Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.

If you selected PPTP, enter your PPTP username and password. Click

Next to continue.