Thrustmaster T3PA-PRO Add-On - Manual (Page 15)

14/17
- Turn the pedal set 180°, then replace and retighten the screws in the 4 screw threads located on
the arch (16).
- Using the included 2.5 mm Allen key (20), unscrew the 3 metal heads (17) to turn them over 180°,
and swap the positions of the accelerator head and the clutch head.
You are now ready to play!
ELECTRONICALLY SWAPPING the accelerator and clutch pedals
When you physically invert the pedal set’s position, simply press the MODE button (located on the
base of your wheel) to swap the accelerator and clutch pedals electronically (the LED color indicates
the position you have selected).
PEDAL SET POSITION LED COLOR
FLOOR-MOUNTED (F1-style)
(by default)
RED
SUSPENDED (GT/Rally-style) GREEN
The selected position is then immediately stored in the wheel’s internal memory.