Dual XDVD8130 - Manual (Page 12)

12
Press AUD to select between Volume (default), Bass, Treble,
Balance, Fader & Subwoofer (if activated).
Press AUD until BAS appears
Rotate encoder left/right or use the VOL   to adjust
(-6 minimum / +6 maximum)
Press AUD until TRE appears
Rotate encoder left/right or use the VOL   to adjust
(-6 minimum / +6 maximum)
Press AUD until BAL appears
Rotate encoder left/right or use the VOL   to adjust
(BALL.12-BAL 00-BALR.12)
BAL 00 represents equal balance
Press AUD until FAD appears
Rotate encoder left/right or use the VOL   to adjust
(FADF.12-FAD 00-FADR.12)
FAD 00 represents equal fader.
Press AUD until SUB appears
Rotate encoder left/right or use the VOL   to adjust
(00 minimum / 12 maximum) Default output level is SUB 06.
Individual Bass and Treble settings are retained in memory
for AM, FM, DVD and AUX modes. This allows you to save
the Bass and Treble settings separately for each mode.
Example:
FM tuner mode can have Bass +3 and Treble -1 while DVD
mode can have Bass +2 and Treble +2.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Press MUTE to silence the audio. “MUTE” will flash in the
display. Press MUTE or another button (except OPEN or
EJECT) to cancel.
Audio Adjustments
Bass
Treble
Balance
Fader
Subwoofer Output Level
(When activated)
Source Audio Memory
Mute
XDVD8130 OPERATION
General Operation - Audio Settings