Televes Coaxdata 1Gbps-HDTV COAX+PLC 1ETH+1SFP - Manual (Page 8)

CoaxManager ™ User Guide
8
Once connected to device we have access to different tabs that show different information about it.
If you can not connect to device, verify that this is correctly connected
via an Ethenet cable. If there is an intermediate switch or other network
devices, are configured properly.
Device Configuration
Operation mode setting can be performed through Configuration tab , where shows device info and
also those fields that configure device access mode, network password or transmission mask.
Device Parameters displays information about device:
• Firmware Version : Version Info of Device Firmware.
• PIB Version : Device PIB Version (Parameters Information Block) . PIB stores user configuration
changes and contains firmware runtime parameters.
• MAC Address : Device MAC Address. All Televes MAC Address start with 00:0E:7C
hexadecimal values and are registered on IEEE.
• DAK key (Device Access key): Key established in the manufacturing process and determines
access to devices when it occurs remotely (via coaxial). Knowledge of this key is essential for
updating/configuring devices remotely, although default DAK key value is always the same, on
manufacturing proccess, simplifying devices configuration.
EN
www.televes.es