Televes Coaxdata 1Gbps-HDTV COAX+PLC 1ETH+1SFP User Manual
Page 28
CoaxManager
™
User Guide
28
Block Slave MME
: This feature prevents slave sent management requests (MME) to master
through coaxial network. It can be activated on slave or master. This option prevents it from the
master to slave CoaxManager can connect to and change its configuration, Increasing the
safety of the installation.
MMEs over Data
: By default, MME messages are transmitted in most robust modulation
possible ROBO (Robust Modulation) to ensure coverage in network. This penalizes the system
bandwidth as the maximum ROBO mode rate is 5Mbps and intensive management protocol
penalizes the bandwidth for use by users. This option allows devices management messages
transmitted in the same channels used for data transmission saving bandwidth. Use this option
on systems where the channel established between master and slave has good quality.
EN