Televes Avant 3 5 In/2 Out BI/FM-V-U-U-INmix (790MHz) - Manual (Page 22)

Launch Amplifier Avant3
22
It then displays the SW version of the Avant3, also
briefly:
PCT firmware
version
------------
V:x.xx
Version de
firmware
unidad:
V:x.xx
PCT firmware
version
------------
V:x.xx
Prodotto
firmware
versione:
V:x.xx
PCT firmware
version
------------
V:x.xx
Produit
firmware
version:
V:x.xx
PCT firmware
version
------------
V:x.xx
Unit
firmware
version:
V:x.xx
PCT firmware
version
------------
V:x.xx
Laitteen
ohjelmisto
versio:
V:x.xx
Next, it will be displayed the main menu first
option.
How to use the programmer
Only from
"Inputs" menu
(short press)
(long press)
MAIN MENU EXTENDED MENU
INPUTS
U1 | U2
|
[2] |[3]
FILT VHF
_ _
05 __
LANGUAGE
English
Saving
config...
(long press)
From any menu
FILTER 5
__
FILTER 1
__
After connecting the programmer to the Avant3, it
sends the parameters with which it is configured
(input configuration, filter settings, ...). During this
process, the programmer displays its version of SW
for a while. The screen appears as follows:
PCT firmware
version
------------
V:x.xx
Version de
firmware
unidad:
V:x.xx
PCT firmware
version
------------
V:x.xx
Prodotto
firmware
versione:
V:x.xx
PCT firmware
version
------------
V:x.xx
Produit
firmware
version:
V:x.xx
PCT firmware
version
------------
V:x.xx
Unit
firmware
version:
V:x.xx
PCT firmware
version
------------
V:x.xx
Laitteen
ohjelmisto
versio:
V:x.xx
** The functions relating to programming
the VHF filter, as well as for powering
preamps through this input, do not apply
to this product.
**
* The channels set above channel 60, will
not appear in the output.
*