SMK-Link Electronics RemotePoint Navigator - Manual (Page 2)

1. Install batteries in the battery compartment.
2. With the computer turned on, plug the receiver into a free USB
port. (If the computer displays a “Found New Hardware” dialog
box, click Next until the driver is installed.)
3. Initialize the Navigator by pressing the Blank button
within 10 minutes of connecting the receiver.
LASER Safety Statement
CAUTION: Use of controls or adjustments or performance of pro-
cedures other than those specified herein may result in hazardous
radiation exposure.
The laser is activated by pressing laser button identified in the
user guide.
Do not stare into laser beam.
Do not shine a laser pointer at anyone.
Do not allow minors to use laser pointer unsupervised.
Do not point laser pointer at any reflective surface. A reflect-
ed beam can be the same as a direct beam.
Do not disassemble the device.
Do not immerse in any liquid or expose to heat or moisture.
Use only within the designed operating temperature range of
0-40 deg C.
This product has no serviceable parts.
Laser Specifications:
The laser used in the VP4150 complies as Class 2 laser product
with: IEC/EN 60825-1: 1994+A1+A2, and CFR Title 21 1040.10 and
1040.11, except for deviations pursuant to Laser Notice No.50,
dated June 24, 2007.
First Use
Changing the Blank Key Code
In certain languages a different key code may be needed to blank the screen during a
presentation. Three key codes are provided for the various presentation programs.
To change between the codes:
• Insert the receiver into a USB port.
• Use a paper clip to press and release the recessed button on the receiver.
• The LED on the receiver will turn orange.
• Start a slide show and test the Blank screen feature.