Denso CU-7011 - Manual (Page 20)

10
Chapter 8 Displaying the CU System
Information on the BHT
You may display the CU-7011 system information on the BHT's LCD.
Set the BHT on the CU-7011 and operate the BHT to display the SYSTEM INFORMA-
TION screen on the LCD. From that screen, you may call up the system program
version and MAC address.
For details about the displaying procedure of the CU system information, refer to the
BHT User's Manual, "LAN Support Version."
Chapter 9 Updating the CU System
Program via the BHT
You may update the CU-7011 system program by using the BHT.
(1) Downloading the CU-7011 system program file
Download the CU-7011 system program file to the BHT from the host computer.
(2) Updating the current CU-7011 system program
Set the BHT on the CU-7011 whose system program should be updated. Operate
the BHT to display the CU-F/W MODIFY screen where you may update the system
program.
During updating, the POWER LED on the CU-7011 will flash. (Refer to Chapter 4,
"CU Status Indication by LED Indicators."
For details about the updating procedure, refer to the BHT User's Manual "LAN
Support Version."