Pengo RV-100 - Manual (Page 16)

16 Variable Speed RV Series Manual
VARIABLE SPEED HYDRAULIC MOTOR INFORMATION
Max Displacement Adjustment
Shift Adjustment Pre-Set @ 3100 PSI
Min Displacement Adjustment
Case Drain Port.
CASE DRAIN MUST BE INSTALLED AND
USED AT ALL TIMES
Figure 4
Figure 5
UNIT IS LIMITED TO 60 GPM DURING
WARM-UP / FREE SPIN MODE.
**MAX HYDRAULIC FLOW IS 120 GPM
DAMAGE WILL OCCUR IF UNIT RECEIVES
MORE THEN 120 GPM!**
Variable speed motor MUST NOT BE
OPERATED without being pre-fi lled with
hydraulic fl uid. Operating the motor
without hydraulic fl uid WILL CAUSE
EXTENSIVE DAMAGE.
The motor has been equipped with quick
connect couplers to ensure the motor
has fl uid at all times. The motor is fi lled
with hydraulic fl uid at the factory and is
shipped in a ready to use condition.
All RV series units require the use of a
motor case drain line. THE DRAIN LINE
MUST BE USED TO AVOID DAMAGE
TO THE HYDRAULIC MOTOR.
IMPORTANT!