Paxton Superchargers Plymouth Prowler User Manual

Page 30

11-4

P/N: 4809629
©2003 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
22OCT02 v2.0 PlymProwler(4809629v2.0)

Here is the trigger wire for the controller.
(See Fig. 11-9.) Use a provided Quick
Connector to attach the gray wire. The other
end of the trigger wire is connected to the
relay with a female disconnect on the 86 ter-
minal (relay). Reassemble the fuse box.

Fig. 11-9

The red, black, and gray wires from the fuse
box are routed along the firewall wiring
loom in the supplied split loom.

Before reinstalling the ECU there is an A/C
line that runs close to the header. When you
relocated the Altenator there was a bracket
that you removed from the back of the
Alternator.This will be used to relocate the
A/C line using the supplied hardware. (See
Figs. 11-10, 11-11.)

Fig. 11-12

Next reinstall the ECU. Being sure that the
bolt head is not contacting the ECU. You
may have to space the ECU out using wash-
ers. (See Fig. 11-12.)

Fig. 11-10

Fig. 11-11