Oxmoor 4x4 - Manual (Page 11)

Page 9
4x4 & 4x4T SPECIFICATIONS
* SMPTE Method; 60 Hz + 7 kHz mixed 4:1.
** Input terminated w/600 ohms, unity gain, adjacent channel driven to +4 dBm output.
Specifications subject to change without notice.
FREQUENCY RESPONSE 20 Hz to 20 kHz......................................... +0, -0.3 dB
HUM AND NOISE Ref. +4 dBm Output @ Unity Gain ........ -94 dB (20 Hz to 20 kHz, Unweighted)
DISTORTION Ref. +4 dBm Output @ Unity Gain
THD + Noise ............................................. 0.0016% (20 Hz to 20 kHz)
SMPTE IMD* ............................................. 0.0021%
Transient IMD ........................................... 0.0031%
(3.15 kHz SQ + 15 kHz Probe, 30 kHz)
CROSSTALK Channel to Channel** .............................. -80 dB (20 Hz to 20 kHz)
AUDIO INPUTS Type ............................................................ Electronically Balanced (RF Suppressed)
Connectors ................................................. Female, 3-Pin, XLR–Type
Input Impedance ...................................... 80 K Ohms
Input Sensitivity ....................................... Nominal +4 dBu, Maximum +24 dBu
Common Mode Rejection Ratio ............. 50 dB at 1 kHz
AUDIO OUTPUTS Type ............................................................ Electronically Balanced (RF Suppressed)
Connectors ................................................. Male, 3-Pin, XLR–Type
Source Impedance .................................... 150 Ohms (75 Ohms/Side)
Recommended Load Impedance ........... 600 Ohms or Greater
Maximum Output Level .......................... Ref. 1 kHz @ Rated THD
Terminated w/600 Ohms ........................ +24 dBm
(All Outputs Driven Simultaneously)
Unterminated ............................................ +26 dBu
TRIM POT GAIN RANGE Ref. +4 dBm, Output @ Unity Gain .......
±
15 dB
SAFETY Listings ....................................................... UL and CE
MAINS POWER Power Requirements ................................ 100 - 125 VAC or 200 - 230 VAC, 50/60 Hz
Current Requirements ............................. 8 Watts
Fuse Type ................................................... 125 mA (1/8 Amp) SB @ 115 VAC
65 mA (1/16 Amp) SB @ 230 VAC
ENVIRONMENTAL Storage Temperature ................................ -25
°
C to 70
°
C (-13
°
F to 158
°
F)
Operating Temperature ........................... -10
°
C to 50
°
C (-14
°
F to 122
°
F)
Humidity ................................................... Less than 80% RH, Non-condensing
MECHANICAL Overall Dimensions.................................. 44 mmH x 482 mm W x 183 mmD
(1.72 “H x 19” W x 7.18” D )
Finish .......................................................... Textured Black Paint
Weight ........................................................ Shipping: 3.9 Kg (8.5 lb) Net: 3.1 Kg (6.9 lb)