OT Systems FT110CB - Manual (Page 13)

FT110CB Series Installation & Operation Manual
www.ot-systems.com 13
(6) Specifications
MODELS*
PARAMETERS
FT110DB-SST(R)SA
FT110DB-SST(R)
(Single-Mode)
FT110DB-SST(R)LSA
FT110DB-SST(R)L
(Single-Mode)
FT110DB-SMT(R)SA
FT110DB-SMT(R)
(Multi-Mode)
OPTICAL
No. of Fiber / Connector 1 / ST (or FC) 1 / ST (or FC) 1 / ST (or FC)
Wavelength 1310/1550 nm 1550/1310 nm 1310/1550 nm
Optical Power Budget 17 dB 24 dB 23 dB
Max Distance 40 km 60 km 4 km
ELECTRICAL VIDEO
Channel / Connector 1 / BNC
System PAL, NTSC, SECAM
Bandwidth ≥ 6.0 MHz
Input/Output Impedance 75 Ohm
Input/Output Level 1.0 Vp-p typical
Differential Gain < 1% typical
Differential Phase < 1
o
typical
SNR >65dB
CONTACT CLOSURE
Channel / Connector 1 / 7-pin Screw Terminal
Direction Bi-directional (Duplex)
Input Dry contact or TTL input
Output Dry contact, Normally Open (NO) or Normally Close (NC)
Max. 1000mA @ 110VDC, 125VAC
POWER
Power consumption 12VDC @ 4.8W
Power Supply Standalone Unit: FT/PA12V DC Adaptor
Card module: Powered by FT-C18 chassis
Connector (Standalone unit) 2-pin Screw Terminal
PHYSICAL
Weight Standalone unit: 0.56 kg Card module: 0.16 kg
Dimensions (W x H x D) Standalone unit: 156 x 30.5 x 223 mm (MAX)
Card module: 148 x 20.4 x 213 mm (MAX)
ENVIRONMENTAL
Operating Temperature -40
o
C ~ +75
o
C
Storage Temperature -40
o
C ~ +85
o
C
Relative Humidity 0 ~ 95% non-condensing
MTBF >100’000 Hours