OT Systems FT410DBE - Manual (Page 13)

FT410DBE Series Installation & Operation Manual
www.ot-systems.com 13
4.4 RJ-45 Pin Assignment for Ethernet Port
According to the EIA/TIA 586B standard, the Straight-through cable is used to connect
between OT products and switch.
4.5 Ground connection
For enhanced safety to reduce the risks of electrical shock and physical damage, caused by
lightning and other power surges, as well as a connection to the surge suppresion devices in the
product, a screw terminal is provided on the Standalone cabinets (Fig. 4.7). It is highly
recommended that the Standalone unit have good ground connections to the buildings ground in
accordance with the local codes.
Fig. 4.7 Standalone unit earth ground terminal location
(5) Operational Guides
5.1 FT410DBE Series Transmitter
LED Indicators
Indicator Color Description
PWR Red Lit when power is supplied to the Transmitter.
OL Yellow Lit when optical signal from receiver to transmitter is active.
VIDEO IN /
VIN
V1 Green
Lit when video signals are fed into the VIDEO IN connectors.
V2 Green
V3 Green
V4 Green
DATA
IN Red Blinks when input data is available at Tx.
OUT Green Blinks when output data is available at Tx.
ETHERNET
TX Amber Blinked when data is output to Rx.
RX Green Blinked when data is input to Tx.