OT Systems FT110DBE - Manual (Page 14)

FT110DBE Series Installation & Operation Manual
www.ot-systems.com 14
Signal Ports
OPT - ST (or FC) Optical Connector for fiber cable connection.
VIDEO IN - BNC Video Connectors for video signal input.
DATA - 7-pin Screw Terminal Block for data signal.
ETHERNET - RJ45 Connector Jack for connection of Ethernet Cable.
5.2 FT110DBE Series Receiver
LED Indicators
Indicator Color Description
PWR Red Lit when power is supplied to the Receiver.
OL Yellow Lit when optical signal from transmitter to receiver is active.
VIDEO OUT / VOUT Green Lit when video signal is received at VIDEO OUT connector.
DATA
IN Red Blinks when input data is available at Rx.
OUT Green Blinks when output data is available at Rx.
ETHERNET
TX Amber Blinked when data is output to Rx.
RX Green Blinked when data is input to Tx.
Signal Ports
OPT - ST (or FC) Optical Connector for fiber cable connection.
VIDEO OUT - BNC Video Connectors for video signal output.
DATA - 7-pin Screw Terminal Blocks for data signal.
ETHERNET - RJ45 Connector Jack for connection of Ethernet Cable.
(6) Specifications
MODELS*
PARAMETERS
FT110DBE-SST(R)SA
FT110DBE-SST(R)
(Single-Mode)
FT110DBE-SST(R)LSA
FT110DBE-SST(R)L
(Single-Mode)
FT110DBE-SMT(R)SA
FT110DBE-SMT(R)
(Multi-Mode)
OPTICAL
No. of Fiber / Connector 1 / ST (or FC) 1 / ST (or FC) 1 / ST (or FC)
Wavelength 1550/1310 nm 1550/1310 nm 1550/1490 nm
Optical Power Budget 17 dB 24 dB 23 dB
Max Distance 40 km 60 km 1 km
ELECTRICAL VIDEO
Channel / Connector 1 / BNC
System PAL, NTSC, SECAM