Round connection, Operational guides, 5) operational guides – OT Systems FTD110DB-XXR3 User Manual
Page 13
FTD110DB-XXR3 Series Installation & Operation Manual
13
4.4 Ground connection
For enhanced safety to reduce the risks of electrical shock and physical damage, caused by
lightning and other power surges, as well as a connection to the surge suppresion devices in the
product, a screw terminal is provided on the Standalone cabinets (Fig. 4.7). It is highly
recommended that the Standalone unit have good ground connections to the buildings ground in
accordance with the local codes.
Fig. 4.6 Standalone unit earth ground terminal location
(5)
Operational Guides
LED Indicators
Indicator
Color
Description
CH1
CH2
CH3
PWR
Red
Lit when power is supplied to the Receiver.
OL
Yellow
Lit when optical signal from transmitter to receiver is active.
V1, V2 or V3
Green
Lit when video signals are available at the VIDEO OUT connectors.
DATA
IN
Red
Blinks when input data is available at Rx.
OUT
Green
Blinks when output data is available at Rx.
Signal Ports
CH1
OPT 1- ST (or FC) Optical Connector for fiber cable connection.
VIDEO OUT 1- BNC Video Connector for video signal ouput.
DATA 1- 7-pin Screw Terminal Block for data signal.
CH2
OPT 2- ST (or FC) Optical Connector for fiber cable connection.
VIDEO OUT 2- BNC Video Connector for video signal ouput.
DATA 2- 7-pin Screw Terminal Block for data signal.
CH3
OPT 3- ST (or FC) Optical Connector for fiber cable connection.
VIDEO OUT 3- BNC Video Connector for video signal ouput.
DATA 3- 7-pin Screw Terminal Block for data signal.