OT Systems FTD100-XXR3 - Manual (Page 11)

FTD100-XXR3 Series Installation & Operation Manual
www.ot-systems.com 11
(6) Specifications
MODELS*
PARAMETERS
FTD100-SSR3SA
FTD100-SSR3
(Single-Mode)
FTD100-SSR3LSA
FTD100-SSR3L
(Single-Mode)
FTD100-SMR3SA
FTD100-SMR3
(Multi-Mode)
OPTICAL
No. of Fiber / Connector 3 / ST(or FC) 3 / ST(or FC) 3 / ST(or FC)
Wavelength 1310 nm 1310 nm 1310 nm
Optical Power Budget 17 dB 24 dB 23 dB
Max Distance 40 km 60 km 4 km
ELECTRICAL VIDEO
Channel / Connector 3 / BNC
System PAL, NTSC, SECAM
Bandwidth ≥ 6.0 MHz
Input/Output Impedance 75 Ohm
Input/Output Level 1.0 Vp-p typical
Differential Gain < 1% typical
Differential Phase < 1
o
typical
SNR >60dB
POWER
Power consumption 12VDC @ 6W
Power Supply Standalone unit: FT/PA12V DC Adaptor
Card module: Powered by FT-C18 chassis
Connector (Micro unit) 2-pin Screw Terminal
PHYSICAL
Weight Standalone unit: 0.68 kg Card module: 0.22 kg
Dimensions (W x H x D) Standalone unit: 156 x 30.5 x 223 mm (MAX)
Card module: 148 x 20.4 x 213 mm (MAX)
ENVIRONMENTAL
Operating Temperature -40
o
C ~ +75
o
C
Storage Temperature -40
o
C ~ +85
o
C
Relative Humidity 0 ~ 95% non-condensing
MTBF >100’000 Hours
*
If the optical connector is FC type, the suffix in the model number will be “-FXX”. Eg. FTD100Micro-FST