OT Systems FTD100-XXR3 - Manual (Page 10)

FTD100-XXR3 Series Installation & Operation Manual
www.ot-systems.com 10
4.2 Ground connection
For enhanced safety to reduce the risks of electrical shock and physical damage, caused by
lightning and other power surges, as well as a connection to the surge suppresion devices in the
product, a screw terminal is provided on the Standalone cabinets (Fig. 4.3). It is highly
recommended that the Standalone unit have good ground connections to the buildings ground in
accordance with the local codes.
Fig. 4.3 Standalone unit earth ground terminal location
(5) Operational Guides
LED Indicators
Indicator Color Description
CH1
CH2
CH3
PWR Red Lit when power is supplied to the Receiver.
OL Yellow Lit when optical signal from transmitter to receiver is active.
V1, V2 or V3 Green Lit when video signals are available at the VIDEO OUT connectors.
Signal Ports
CH1
OPT 1- ST (or FC) Optical Connector for fiber cable connection.
VIDEO OUT 1- BNC Video Connector for video signal ouput.
CH2
OPT 2- ST (or FC) Optical Connector for fiber cable connection.
VIDEO OUT 2- BNC Video Connector for video signal ouput.
CH3
OPT 3- ST (or FC) Optical Connector for fiber cable connection.
VIDEO OUT 3- BNC Video Connector for video signal ouput.