OT Systems ET4200CPp-RS8 - Manual

ET4200CPp-RS8 / ET4200CPp-RS16
Receiver of 8/16-port Ethernet Extender over Coax with PoC + 4-port 10/100/1000TX Ethernet Switch
1 V1.0(Draft)
This quick start guide describes how to install and use the receiver of 8/16-port Ethernet Extender over Coax with Power over Coax (PoC) + 4-port
10/100/1000Base-T Ethernet switch.
Overview
The ET4200CPp-RS8/16 receiver works with the transmitter of 1 port Ethernet Extender over Coax with PoC
(ET1100CPp-T) to provide Ethernet Extension of 8/16 channel 10/100Base-TX over Coaxial cable to 4-port
10/100/1000Mbps Ethernet. The maximum transmission distance is 800m. The product support PoC, hence, no
power point is required at the camera side for the transmitter (ET1100CPp-T) and its connected IP camera if the
camera obtain power from the transmitter via Power over Ethernet (PoE). The Ethernet data received by anyone
of the coax data port (1-8/16) at the receiver is transferred to all four Ethernet ports (P1-P4). The product is good
for retrofit of analogue system by using the existing coaxial cable infrastructure.
General
To ensure trouble free transportation and storage, all OT Systems products must be thoroughly inspected, tested
and properly packed before delivery. Check the product upon receipt for any visible damage which may have been
caused during shipment.
Package Content
 Receiver of 8-port Ethernet Extender over Coax with PoC + 4-port 10/100/1000Base-T Ethernet Switch x
1(ET4200CPp-RS8) or,
Receiver of 16-port Ethernet Extender over Coax with PoC + 4-port 10/100/1000Base-T Ethernet Switch x
1(ET4200CPp-RS16)
 AC Power Cord x 1
 Quick Start Guide x 1
Physical Description
Front Panel
ET4200CPp-RS8
ET4200CPp-RS16