One Systems PTB-8NP User Manual

Page 7

Text mode
Original mode

Set the desired tilt angle of the OPA-8NP loudspeaker in the loudspeaker bracket and
then securely tighten the two (2) M8 bolts against the sides of the loudspeaker bracket.

Now the pan angle may be set. The PTB-8NP allows pan angle aiming in 10 degree
increments thru a full 360 degree circle. Once the desired pan angle is set the M10 bolt
and nylon insert nut that secure the ceiling bracket to the loudspeaker bracket may be
tightened.

Tighten the M10 hex head bolt and nylon insert nut once the pan angle has been set.

NOTE: Secondary safety cables are STRONGLY recommended and should be secured
to a structural point NOT associated with the PTB-8NP bracket or loudspeaker!

The products referenced in this manual are in conformity with the following
standards or other normative documents: Machinery Directive 2006/42/EC

Nashville, TN U.S.A.