nMediaPC HTPC 1080i User Manual

Page 4

Step 5: iPOD/iPhone Base

1. When iPOD/iPHONE is plug in the base, USB charging is auto on
2. To use the Audio Out to a receiver/AMP, a RCA audio cable is needed to connect the Audio Out

to your receiver or speaker or sound card Audio In when iPod/iPhone is put on the dock station.
Video Out IS NOT supported. Media data can still be played in USB transfer.

Other Component Installation

For other components, including hard drive connection; RAM; CPU & cooler; optical drive, operating
system etc., follow the user manuals and motherboard manual instruction.

Specifications

Model

HTPC 1080i

Color

White

Dimension

Case: 10.6"(W) x 3.8"(H w/ feet) x 10.6"(D)

Motherboard

Support Mini iTX (Intel ATOM recommended)

Power Supply

nMedia 1080IP (not included)

Drive Bays

Internal 2.5” Bay x 1
Internal Slim Optical Drive x 1

Cooling

Fanless (25 ~ 90mm fan can be added if space allow)

Feature

Built in iPod/iPhone Base with Audio Out Connector

Reference

Visit our website for more detail installation in PDF format.

http://www.nmediapc.com/HTPC 1080i/Quick_Guide_1080i.pdf

Technical Support:

[email protected]

Safety Instructions

Always read the step by step installation instruction to protect your components

Keep the user guide for future reference

Keep away from humidity, liquid and temperature above 60c (140 f) environment

Make sure the voltage of the power supply and adjust properly 110/230V

Always unplug the power cord before inserting any add-on devices

Get the system checked by service personnel if below happens:

The power cable is damage

Liquid has penetrated into the system

Dropped and damaged

RMA Return Policy

All accessories and cables must be returned as they were shipped

Carefully re-packaging is needed to avoid shipping damages

All warranties are subject to properly uses. Any human power damages return may be rejected
according to warranty terms and conditions