Installing a lan module – NEXCOM NSA 5150 User Manual

Page 58

Text mode
Original mode

NSA 5150 User Manual

Chapter 3: System Setup

Mounting screw

Cover plate

Installing a LAN Module

The system is equipped with 1 LAN module bay. To install a LAN module,
please follow the instructions below.

1. Remove the screw on the cover plate of the LAN module then put them

in a safe place for later use.

Please correctly follow the below instructions and noted items
to avoid making unnecessary damages. Make sure the power
supply is switched off and disconnected from the power sources
before replacing or adding LAN modules to prevent electric
shock or system damage.

CAUTION!

2. Place the LAN module into the tray making sure the connector side of

the module is facing inwards.

Connector

side