NEXCOM VMD 1000 - Manual (Page 17)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VMD Series User Manual
Chapter 2: VMD Series Hardware Functionality
9
Front Panel & Rear Panel Functions
Front Panel
Chapter 2: VMD Series Hardware Functionality
1. Power On/Off Control
Press this button for 4 seconds -- the monitor will turn on.
2. Brightness Control
There are two modes for Brightness Control:
Manual Mode
LCD brightness can be adjusted in 4 levels using the
buttons.
Auto Mode
The built-in light sensor will detect environmental brightness and
adjust LCD brightrness automatically.
Switching between Manual Mode and Auto Mode
To toggle between
Manual Mode and Auto Mode,
press and hold the buttons for 4 seconds.
3. Volume Control
Audio volume can be adjusted in 8 levels using the buttons.
4. LED
PWR LED is turned on when VMD 1000 is powered on.
Mode LED is turned on when brightness control is in Auto Mode
5. Light Sensor
NOTE: 1. The example photo is VMD1000/1001.
2. The all VMD series are all the same functionality with
function keys.
3 2
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
1
5
4