Power configuration, Restore on ac power loss, Bios security configuration – NEXCOM NDiS B533 User Manual
Page 57: Bios lock, Rtc ram lock
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
43
NDiS B533 User Manual
Chapter 4: BIOS Setup
Advanced
Boot
Security
Save
&
Exit
Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select AC power state when
power is re-applied after a power
failure.
Restore AC Power Loss
[Power Off]
Power Configuration
This section is used to configure power state settings.
Restore on AC Power Loss
Power Off
When power returns after an AC power failure, the
system’s power is off. You must press the Power button
to power-on the system.
Power On
When power returns after an AC power failure, the system
will automatically power-on.
Advanced
Boot
Security
Save
&
Exit
Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable BIOS lock
enable (BLE) bit.
BIOS Security Configuration
BIOS Lock
RTC RAM Lock
[Disabled]
[Disabled]
BIOS Security Configuration
This section is used to configure BIOS security.
BIOS Lock
Enables or disables BIOS lock enable (BLE) bit.
RTC RAM Lock
Enables or disables RTC RAM lock.