Installing the cpu – NEXCOM NDiS 163 User Manual

Page 38

Chapter 3: System Setup

NDiS 163 User Manual

Installing the CPU

1. Loosen the mounting screws that secure the heat sink to the chassis.

• Make sure all power cables are unplugged before you install

the CPU.

• The CPU socket must not come in contact with anything

other than the CPU. Avoid unnecessary exposure.

Mounting

screw

2. Now remove the heat sink to access the CPU socket.

Bottom Side of the Heat Sink

3. The CPU socket is readily accessible after you have removed the heat

sink.

CPU socket

CAUTION!