1 player cable connection – NEXCOM PDSP 0811 User Manual

Page 7

Chapter 2: Player system installation and configuration

PowerDigis V2 Player User Manual

CHAPTER 2: Player system installation and configuration

2.1 Player Cable Connection

You can use either of the following measures to configure the Player
cable connection:

2.1.1 Managing Player from a separate
management PC/ laptop

Step 1a Choose the video output (DVI/VGA/HDMI/LVDS) you would like
to use to connect the cable.

Step 1b Connect another end of the cable to your display.

Step 2a Plug a LAN cable into PDS Player LAN port 1.

Step 2b Connect another end of LAN cable to LAN port 1 on the hub.

Step 2c Plug another LAN cable into Management PC/laptop LAN port

Step 2d Connect another end of LAN cable to LAN port 2 on the hub.

Step 3a Plug the third LAN cable to LAN port 3 on the hub

Step 3b Connect another end of LAN cable to the Cable Outlet

Step 4 Plug the DC end of the power adapter into the power connector
of the PDS

Player unit. Then, plug the AC end to an electrical outlet. Push the
Power button and the PDS Player will power up immediately.

This manual is related to the following products: