NEXCOM CMS 1100 - Manual (Page 7)

Chapter 2: CMS System Installation and Configuration
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 4 PowerDigiS CMS User Manual
Chapter 2: CMS System Installation and Configuration
2.1 CMS System Installation
You can use either of the following measures to configure the Player
cable connection:
Step 1a Choose the video output (DVI/VGA/HDMI/LVDS) you would like
to use to connect the cable.
Step 1b Connect another end of the cable to your display
Step 2a Plug a LAN cable into PDS Player LAN port 1
Step 2b Connect another end of LAN cable to LAN port 1 on the hub
Step 2c Plug another LAN cable into Management PC/laptop LAN port
Step 2d Connect another end of LAN cable to LAN port 2 on the hub
Step 3a Plug the third LAN cable to LAN port 3 on the hub
Step 3b Connect another end of LAN cable to the Cable Outlet
Step 4 Plug the DC end of the power adapter into the power
connector of the PDS Player unit. Then, plug the AC end to an electrical
outlet. Push the Power button and the PDS Player will power up
immediately.