NEXCOM NPT 5850 - Manual (Page 26)

20
AMT Configuration
Configures the AMT function.
USB Configuration
Configures the USB devices.
Second Super IO Configuration
The Section is used to configure the I/O function supported by on board Super I/O
chip.
Super IO Configuration
This section is used to configure the I/O functions supported by the onboard Super I/O
chip.
H/W Monitor
This section is used to configure the hardware monitoring events such as
temperature, fan speed and voltages.
Sandybridge PPM Configuration
This section is used to configure Sandy bridge PPM Configuration Parameters.
ACPI Setting
This section is used to set the Advanced Configuration and Power Interface.