NEXCOM NEX 880 - Manual (Page 46)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 33
Chapter 3: BIOS Setup
NEX 880/890 User Manual
Super IO Configuration
This section is used to configure the serial and parallel ports.
Super IO Chip
Displays the Super I/O chip used on the board.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
→ ←: Select Screen
↑↓: Select Item
Enter: Select
+-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
Aptio Setup Utility - Copyright (C) 2008 American Megatrends, Inc.
Advanced
Set Parameters of Serial
Port 0 (COMA)
Super IO Configuration
Super IO Chip
u Serial Port 0 Configuration
u Serial Port 1 Configuration
u CIR Controller Configuration
IT8728
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal settings for the Super IO device.
Serial Port 0/1 Configuration
This section is used to configure the serial ports.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
→ ←: Select Screen
↑↓: Select Item
Enter: Select
+-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
Aptio Setup Utility - Copyright (C) 2008 American Megatrends, Inc.
Advanced
Enable or Disable Serial
Port (COM)
Serial Port 0 Configuration
Serial Port
Device Settings
Change Settings
[Enabled]
IO=3F8h; IRQ=4;
[IO=3F8h; IRQ=4]