NEXCOM NEX 880 - Manual (Page 45)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 32
Chapter 3: BIOS Setup
NEX 880/890 User Manual
USB Configuration
This section is used to configure the USB.
USB Configuration
Displays the detected USB devices.
Legacy USB Support
Enable Enables Legacy USB.
Auto
Disables support for Legacy when no USB devices are connected.
Disable Keeps USB devices available only for EFI applications.
EHCI Hand-Off
This is a workaround for OSes that does not support EHCI hand-off. The
EHCI ownership change should be claimed by the EHCI driver.
Device Reset Timeout
Selects the USB mass storage device’s start unit command timeout.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
→ ←: Select Screen
↑↓: Select Item
Enter: Select
+-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
Aptio Setup Utility - Copyright (C) 2008 American Megatrends, Inc.
Advanced
Enables Legacy USB
support. AUTO option
disables legacy support if
no USB devices are
connected. DISABLE
option will keep USB
devices available only for
EFI applications.
USB Configuration
USB Devices:
1 Keyboard, 2 Hubs
Legacy USB Support
EHCI Hand-Off
Device Reset Timeout
[Enabled]
[Disabled]
[20 sec]