Serial port 2 configuration, Serial port 3 configuration – NEXCOM NISE 301 User Manual
Page 57

Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
43
NISE 301 User Manual
Chapter 4: BIOS Setup
Serial Port 2 Configuration
This section is used to configure serial port 2.
Serial Port 3 Configuration
This section is used to configure serial port 3.
Serial Port
Enables or disables the serial port.
Onboard Serial Port Mode
Select this to change the serial port mode to RS232, RS422 or RS485.
Terminal Resistor
Enables or disables the terminal resistor.
Serial Port
Enables or disables the serial port.
Terminal Resistor
Enables or disables the terminal resistor.
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 2 Configuration
Serial Port
Device Settings
Onboard Serial Port Mode
Terminal resistor
[Enabled]
IO=2F8h; IRQ=3;
[RS232]
[Enabled]
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 3 Configuration
Serial Port
Device Settings
[Enabled]
IO=3E8h; IRQ=11;